IMPORTANT NOTE

Below you will find the instructions for a proper and safe use of the Cab4 filter equipment that has to be fully respected by the users. 

Failure to comply with such instructions may result in severe consequences. 

All the doors and windows of the vehicle must be carefully closed. 

Windows and doors seals must be in perfect condition as they protect the interior from external factors. If they are porous or have poor adhesion, exterior pollutants will then be able to enter the passenger compartment.

The rubber flap used to route the tool cable must be perfectly positioned and in excellent condition (no cracks or snags).

All plugs and accessories must be in place to prevent cabin air leaks. 

Air conditioning in perfect working order. 

The ventilation must be activated at least in 3rd speed to ensure that the air flow is sufficiently high and the re-circulation damper in the closed position. 

The pressure gauge must be in the green zone to indicate that the over pressure is reached.

Green: Ok to start the work 

Red: Wait to reach the right Pressure in accordance with the Required Recommendations to work in safe conditions.

The original filters must be replaced by a CAT 4 carbon filter. 

The filter must be changed: Every 150 hours. 

It is necessary to remove the filter after each use using special gloves and to take all necessary precautions not to damage the assembly during disassembly. 

Allow the filter to air dry and place it back in an airtight bag after use. 

A filter cannot be cleaned (water / blower) at the risk of seriously damaging the filter media and allowing toxic particles to pass. 

Optimal protection starts with a perfect working environment! 

The operator must put on a clean coveralls, gloves and shoes, get the hands cleaned. 

Do not pollute the interior of the cabin by storing soiled objects (gloves, overalls, cans, pesticides, etc.).

Rince the sprayer after usage and clean the rail Filters. 

Do not get out of the vehicle during spraying work, but if it is necessary to leave the vehicle, it is necessary to wait until the sprayed product has settled on the ground. 

Always use personal protective equipment to handle phytosanitary products and the material in contact with them.